Transmission simulation software [Hoya Color Filter Simulator]

This software facilitates obtaining data of spectral transmittance characteristics after changing the thickness of the glass.

  • The internal and external transmission of each glass type with any thickness displayed
  • Transmission curves with multiple conditions (e.g. glass type, thickness) superimposed and comparable (Two types of glass simulations can be displayed)
  • Transmission data exportable to an CSV file
  • Operation is possible with Excel file etc.

Detailed information on software

  • Software name: HOYA CAL
  • Ver: 1.0.0
  • Release date: 2014/12/15
  • System requirements: Windows 7, Windows 8 (32 bits/64 bits) (Operation check done)
  • Reprint condition: No reprinting without permission
  • Remark: This software requires [Microsoft .NET Framework 4.0 or later].
       In some cases, software may not run depending on the PC environment. Please not change the name of software.

How to install

Download [] and save under any Drive. Please refer to handling manual. Also, although it does not depend on the drive under the PC environment, depending on the operation drive, please change to the setting that can write and read.

Software usage conditions

The customer (hereafter referred to as ″the user″) shall read the following articles with regard to using the contracted software that HOYA CANDEO OPTRONICS CORPORATION (hereafter referred to as ″we″) provides the user.
Once the ″Software usage stipulations″ are read and the ″Agree and download″ button is pressed, downloading the software starts.

Conditions of using this software

  1. The laws and treaties concerning copyrights and other intellectual property rights protect this software.
    Be careful not to engage in any of the following:
    • Redistribution of this software
    • Commercial use of this software
    • Use of this software after modification
  2. The transmission data of colored glass filters displayed by this software represents typical values.
    The transmission of a product can be changed within the range of the transmission specifications.
  3. We assume no responsibility for any damage caused by using this software.
  4. The specifications of this software may be subject to change without notice due to improvement of our products.
  5. All or part of these conditions of use may be subject to change without notice.